DSCover Satellite Products Home Security System SCW904x Benutzerhandbuch

To access Keypad Programming enter [ ][8][Installer’s Code][ ].
To return to System Programming press [ ].

There are 39 programmable system labels which are programmable through the Keypad or Downloading. Once a label programming section has 
been entered, use the [<] and [>] Cursor keys to move left and right to get to another letter within the label. The letters of the alphabet are divided 
up among the number keys 1-9 on the keypad as described below.

For example, if you press the [4] key once, the letter “J” will appear above the cursor on the display. Press the [4] key again, the next letter “K” 
will appear, and so on. If a different number is pressed, e.g. the [6] key, the cursor will automatically move to the right one space, i.e. the letter 
“P”. To erase a character, use the [<] [>] keys to move the cursor under the character, then press the [0] key. If the [0] key is pressed, and [<] or [>] 
was the previous key pressed, the character over the cursor will be cleared. If any other key was previously pressed, then increment to and clear 
the next character. While programming a label, press the [ ] key to call up an options menu. To select an option, scroll through the options using 
the [<] [>] keys, then press the [ ] key to select. 

Enter a 28 character zone label for up to 32 wireless zones and 2 hardwired zones (33 & 34). 
Default Value = ‘ZONE----XX’ where XX equals the zone number.

Enter a 28 character Fire Alarm label. Default Value = ‘FIRE-ZONE’.

Enter a 32 character Fail to Arm Event Message. Default Value = ’SYSTEM HAS ------’, ‘FAILED-TO-ARM---’.

Enter a 32 character Alarm when Armed Event Message. Default Value = ‘ALARM-OCCURRED--’, ‘WHILE-ARMED---’.

Enter a 28 character Command Output Label label for each command Output (2 MAX). 
Default Value = ‘COMMAND-O/P-X-’ where X equals the Command Output number.

[<] = Display Left (Previous)
[>] = Display Right (Next)
[1] = A B C 1
[2] = D E F 2
[3] = G H I 3
[4] = J K L 4
[5] = M N O 5

[6] = P Q R 6
[7] = S T U 7
[8] = V W X 8
[9] = Y Z 9 0
[0] = SPACE
[*] = SELECT 
[#] = ESCAPE 

Saves the new label.

CHANGE CASE 

Toggles the letter entry between upper case letters (A,B,C...) and lower case letters (a,b,c...).

For entering uncommon characters. There are 255 characters.
Use the [<] [>] keys to scroll through the characters or enter a 3 digit number from 000-255. 
Press the [*] key to enter the character into the label.

Clears the display from the character where the cursor was located to the end of the display.

Clears the entire label field.

WWW.DIYALARMFORUM.COM