Dixon Aficio 1515 Benutzerhandbuch
Copying from the Bypass Tray
27
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
Note
❒ If you do not use standard size
copy paper, you should enter ver-
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
Reference
For details about paper capacity in
the bypass tray, see p.12 “Copy Pa-
per”.
For details about paper capacity in
the bypass tray, see p.12 “Copy Pa-
per”.
AAAA
Open the bypass tray.
BBBB
Adjust the paper guides and gen-
tly insert the copy paper face
down.
tly insert the copy paper face
down.
1.
Horizontal size
2.
Vertical size
3.
Paper guides
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
paper misfeeds might occur.
Note
❒ Set the direction of the copy pa-
per to
L.
❒ If you set A4, 8
1
/
2
"
× 14" or larg-
er copy paper, hold the edge of
the paper.
the paper.
❒ You can specify the type of pa-
per used for the bypass tray. See
“6. Bypass Paper Type” in p.54
“Copier Features”
“6. Bypass Paper Type” in p.54
“Copier Features”
❒ The machine operates the func-
tion that forces to feed the paper
in three minutes after you load
the paper on the bypass tray.
in three minutes after you load
the paper on the bypass tray.
Metric version
• Vertical: 90 –
216mm
• Horizontal: 140 –
356 mm
Inch version
• Vertical: 3.5" – 8.5"
• Horizontal: 5.5" –
14"
StellaC1a-EN-CopyF_V4_FM.book Page 27 Wednesday, September 12, 2001 4:03 PM