Digital Networks North America DNswitch 800 Benutzerhandbuch

DNswitch 800

Using Web-Based Management  5

The HTTP Configuration menu is used to enable or disable the ability to 

manage the switch with Web management. The HTTP Server parameter 
must be set to ENABLED before Digital Networks WebView can be used 

to manage the switch. If it is desired to disallow Web management of the 

switch, this parameter should be set to DISABLED

1.  Starting at the Main Menu of the console user interface, select 

Management Setup Menu / Network Configuration / HTTP 

Configuration.

2.  Select HTTP Server, and use the Space bar to toggle between 

ENABLED and DISABLED.

Do the following to use Digital Networks WebView:

1.  Start a Java-enabled Web browser from any machine with network 

access to the switch. (Preferred browsers include Internet Explorer 

4.0 or above, or Netscape Navigator 4.0 or above.)

2.  Enter the IP address for the switch you want to manage in the URL 

field of the browser.

3.  The screen shown below will appear, prompting you to enter the user 

name and password for management access.

Use the name for the default administrator (admin), and the password 

previously entered in the Setting Up Web Management section. This 
will allow read/write access to the switch.

The full application will now launch. A four-frame page will display 

with the product graphic located in the upper right hand frame.

4.  To stop Digital Networks WebView, close the Web browser 

application.