DIESEL DZ7130 Benutzerhandbuch

1. At each hour, time will automatically display for 2 seconds.
2. Press B for time display and animation.
3. Press B again to toggle time/date mode.
4. When time or date is displayed, press and hold B for 3 seconds to toggle horizontal/vertical display.

1. From time display, press and hold A; 12/24 hour format will begin flashing.
2. Press B to select 12/24 hour format.
3. Press A to set and advance to hour.
4. Press B to advance digit.
5. Press A to set and advance to next setting value.

6. Setting sequence is: 12/24 hour format, hour, minutes, date, month.
7. Press A to save and exit setting mode.
  NOTE: In 12 hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m. time.
  NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to normal time display.

1. Press B to display time, press B again to display date, press and hold A; first letter of message will begin

flashing.

2. Press B to select character.
3. Press A to set and advance to the next character.
4. Repeat steps until desired message is complete. Please note there are only ten spaces available.

1. Press A for EL.

2. Press B to change mode. Mode sequence is time, time zone 2, alarm, timer.

1. Press and hold A for 3 seconds to enter setting mode; 12/24-hour format 

will begin flashing.

2. Press B to change 12/24-hour format.

3. Press A to set and advance to seconds.

4. Press B to reset seconds to zero.

5. Press A to set and advance to hour.

6. Press B to increase digits; press and hold B for fast advance.

7. Press A to set and advance to next setting value.

8. Setting sequence is 12/24-hour format, seconds, hour, minutes, year, 

month, date.

9. Press A to exit setting mode.

1. Press B to change to time zone 2.

2. Press and hold A for 3 seconds to enter setting mode; hour will begin 

flashing.

3. Press B to increase digit; press and hold B for fast advance.

4. Press A to set and advance to minutes.

5. Press B to increase digit; press and hold B for fast advance.

6. Press A to exit setting mode.

1. Press B to change to alarm mode.

2. Press and hold B for 3 seconds to toggle alarm/chime on/off.

3. Alarm will sound for 10 seconds. Press any pusher to silence alarm.

1. In alarm mode, press and hold A for 3 seconds to enter setting mode; 

hour will begin flashing.

2. Press B to increase digit; press and hold B for fast advance.

3. Press A to set and advance to minute.

4. Press B to increase digit; press and hold B for fast advance.

5. Press A to exit setting mode.

1. Press B to change to timer mode.

2. Press A to start/stop the timer.

3. When timer reaches zero, alarm will sound for 15 seconds.

4. Press any pusher to silence alarm.

1. Press and hold A for 3 seconds to enter setting mode; hour will 

begin flashing.

2. Press B to increase digit; press and hold B for fast advance.

3. Press A to set and advance to next setting value.

4. Setting sequence is hour, minute, second.

5. Press A to exit setting mode.

1. Press A to change mode. Mode sequence is normal time, recall, alarm, and 

countdown timer.

2. Press and hold A 3 seconds to toggle auto EL on/off.
3. Press B for EL.
4. Press C to toggle hourly chime on/off.
5. Press D to flash time zone 2. Press and hold D 3 seconds to toggle normal 

time display/time zone 2.

6. In normal time display, press and hold B 3 seconds; hour will begin flashing.
7. Press C to increase digit; press D to decrease digit. Press and hold C or D 

for fast increment/decrement.

8. Press A to set and advance to next setting value.
9. Repeat steps 2 and 3 through setting sequence. Setting sequence is: hour, 

minute, second, year, month, date, 12/24-hour format, month/date or date/
month format.

10.Press B to exit setting mode.
11.To set Time Zone 2, press and hold D 3 seconds to change to Time Zone.
12.Then use steps 1-5 to set.

1. Press A to change to recall mode.

2. Press C to toggle through set data: total time, best time, average time, 

and each lap (up to 100 laps).

3. Press D to display current set; press D again to scroll to next set.
4. Press and hold D 3 seconds to delete all stored data in the current set.

1. Press A to change to alarm mode.
2. Press C to toggle alarm on/off.
3. Press D to toggle alarm 1/alarm 2.

1. In alarm mode, press and hold B 3 seconds; hour will begin flashing.
2. Press C to increase digit; press D to decrease digit. Press and hold C or 

D for fast increment/decrement.

3. Press A to set and advance to next setting value.
4. Repeat steps 2 and 3 through setting sequence. Setting sequence is: 

hour, minute, time zone 1/time zone 2. 5. Press B to exit setting mode.

1. Press A to change to timer mode. Default setting is 5 minutes.
2. Press C to start timer; press D to stop the timer.
3. Press and hold D 3 seconds to clear the countdown and reset the timer.

1. In timer mode, press and hold B 3 seconds to enter setting mode; 

hour will begin flashing.

2. Press C to increase digit; press D to decrease digit. Press and hold

 C 

or D for fast increment/decrement.

3. Press A to set and advance to next setting value.
4. Repeat steps 2 and 3 through setting sequence. Setting sequence is: 

hour, minute, seconds.

5. Press B to exit setting mode.

1. In any mode, press and hold C 3 seconds to change to 

chronograph mode.

2. Press C to start the chronograph; press D to stop the chronograph.
3. Press and hold D 3 seconds to reset to zero.

1. Press C while the chronograph is running for lap reading.

2. Press B to return to chronograph next lap (up to 100 laps).
3. Press D to stop chronograph.
4. Press and hold B 3 seconds to save set data, or press and hold
  D 3 seconds to reset to zero.