Delta SS1-UM-1.05 Benutzerhandbuch

••••

From this point you can launch 

, the SunScan application, but first it is a

good idea to familiarise yourself with the Workabout’s keyboard.  The main uses of
the keys are explained in the Workabout user Guide on pages 10 and 11.

The following keys are particularly important for the Workabout:

Pops up a menu of options relevant to your current activity

Move the cursor up and down menu options, or adjust the value of a set-
up parameter

Cycle through the available settings for a menu option

Carry out highlighted activity, choose menu option or accept highlighted
setting

Exit from current activity or menu, abandoning any changes

Gives you and expanded range of choices, especially in file operations

The important thing to remember is that you can get out of any menu by pressing

, and out of any application by pressing 

∪

∪

∪

∪

. This should get you back to the

Psion System Screen, as shown above.  If things get really stuck, you may have to
reset the Workabout, as explained in its manual on page 20.

♦

 In the System Screen, use the arrow keys to highlight the 

SunData 

application,

and then press 

.

SunData will load and then flash up

 as it tries to connect to

the probe.  Since you haven’t yet
connected the probe, it will let you know
that 

, and display

this screen (the title screen):

Now, you need to tell SunData to work in Emulator mode.

♦

  Press 

 and then use the 

←

←

←

←

→

→

→

→

arrow keys to select the 

 menu,

which will look like this:

♦

 Use the 

↑↑↑↑↓↓↓↓

 arrow keys to highlight

, and press 

 to pop

up a dialog box with options on which sensors you have attached.

♦

 Use the  

←

←

←

←

→

→

→

→

 arrow keys to change the

D

 setting to 

 like

this:

♦

 Set the 

 to 

 so that a

Beam Fraction Sensor will also be
emulated.

♦

 Press 

 to accept this setting and return to the title screen.

↑↑↑↑

↓↓↓↓

→

→

→

→

←

←

←

←