DCS TV Converter Box 954 Benutzerhandbuch

dCS 954 User Manual

 Manual for Standard Software Version 1.5x

dCS Ltd 

June 2000

Manual part no: DOC136954 iss 2B1

Page 27

file 135954ma2b1.pdf available from website

Contact 

 on + 44 1799 531 999 

email to: more@dcsltd.co.uk

(inside the UK replace + 44 with 0)

web site: www.dcsltd.co.uk

(

Button).  In PCM mode, this controls the operation of the 

 button.

Input

Configures the BNC input connectors as a data
input. Press the 

 button to select it.

RefCl

Configures the BNC word clock in (Clk In)
connector as a reference clock input. Press the

 button to sync the unit to the Word clock

while taking data from one or more of the AES
inputs. The BNC LED will light, in addition to the
LED(s) for the data source. Press the 

 button

again to sync to the data input instead.

This mode of operation enable the unit to sync to one clock source and rapidly
switch between other synchronous sources without going through a PLL locking
sequence.  It might be used, for example, in A/B comparisons or in locking to a
house sync, just taking data from AES feeds.

If the unit is already locked to SDIF or DSD, the 

RefCl

 option is disabled.

(

utput).  In PCM mode, this sets the format of the BNC

 

Out connector

(Clk Out).

SDIF

Sends out SDIF Word Clock on the Clk Out
connector. The unit must be locked to generate an
output.

AES

Sends out AES3 coded data at TTL levels, at up to
96 kS/s on the 

 connector. This works

when the unit is locked to Single AES, SDIF or
BNC - AES input.

(

).  Sets the operation of the 

 and 

 buttons.

Phase

Sets the two buttons to their standard functions.

Vol

The two buttons act as a digital volume control.

 reduces the 

 in 0.1dB steps, while

 increases the 

. The change

accelerates if a button is held down. The range is
0dB to –20dB.

dCS telephone number scrolls across the display.

dCS fax number scrolls across the display

The control board part number (version) scrolls along the display.