DCS Computer Hardware dCS 974 Benutzerhandbuch
dCS 974 User Manual
Manual for Software Version 1.0x
dCS Ltd
May 2001
Manual part no: DOC1241121A1
Page 25
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
General Sample Rate Conversion and Distribution
From ANY format: AES, SPDIF, Toslink, SDIF-2 at ANY sample rate:
11.025k, 12k, 16k, 22.05k, 24k, 32k, 44.1k, 48k, 88.2k or 96kS/s
or
Dual AES at 88.2k, 96k, 176.4k or 192kS/s
or
Quad AES at 176.4 or 192kS/s
or
DSD SDIF-2, DSD SDIF-3 or DSD Quad
To ALL formats: AES, SPDIF, Toslink & SDIF-2 at ANY sample rate:
11.025k, 12k, 16k, 22.05k, 24k, 32k, 44.1k, 48k, 88.2k or 96kS/s
or
Dual AES at 88.2k, 96k, 176.4k or 192kS/s
or
Quad AES at 176.4 or 192kS/s
or
DSD SDIF-2, DSD SDIF-3 or DSD Quad
PUSH
PUSH
PUSH
PUSH
PUSH
AES / EBU INPUTS
AES / EBU OUTPUTS
AES 1
AES 2
AES 3
AES 4
IN
OUT
AES CLK OUT
SYNC INPUT
AES / EBU REFERENCE LOOP
SPDIF
IN
OUT
RCA
BNC
TOS
CH1 IN
WCLK IN
CH1 OUT
LOOP IN
CH2 IN
LOOP OUT
CH2 OUT
WCLK OUT
REMOTE
IN
LOOP
OUT
MAINS FUSE (2AT)
ON OFF
D
S
D
/ S
D
IF
Figure 9 – General Sample Rate Conversion
The dCS 974 converts any one of 12 sample rates in any format to any of the 12
sample rates in ALL formats: 4 AES, 2 electrical SPDIF, optical SPDIF or
SDIF-2 outputs. Most frequency combinations (including all the primary ones)
are accommodated in one pass - see
sample rates in ALL formats: 4 AES, 2 electrical SPDIF, optical SPDIF or
SDIF-2 outputs. Most frequency combinations (including all the primary ones)
are accommodated in one pass - see
on page
. For best results,
slave the unit to the audio input,
AES Ref Loop In
or the SDIF-2
WCLK IN
.
do this:
Connect any digital audio source of any word length between 8 and 24 bits,
using single AES or dual AES or quad AES to the AES inputs, or using single or
double speed SDIF-2 to the SDIF-2 inputs, or using single wire SPDIF to the
appropriate SPDIF input.
using single AES or dual AES or quad AES to the AES inputs, or using single or
double speed SDIF-2 to the SDIF-2 inputs, or using single wire SPDIF to the
appropriate SPDIF input.
do this:
Select
Audio Input
accordingly. Output via any of the outputs.
Sample Rate Conversion settings:
Sample Rate Conversion: On
Audio Input Select
:
Any, including
Dual AES
if the Input Sample
Rate is 88.2kS/s or more and
Quad AES
if the
Input Sample Rate is 176.4 kS/s
or 192kS/s.
Output Mode
:
Normal
or
Dual AES
may be selected if the
Output Sample Rate is 88.2 kS/s or 96kS/s.
Dual AES
or
Quad AES
must be used for
192 kS/s or 176.4 kS/s.
Other settings:
Any.
3
It has to be Dual AES or Quad AES for 192 kS/s or 176.4 kS/s