DCS Computer Hardware dCS 974 Benutzerhandbuch
dCS 974 User Manual
Manual for Software Version 1.0x
dCS Ltd
May 2001
Manual part no: DOC1241121A1
Page 69
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
LED indicators
A group of LED indicators to the right of the LCD display gives a level of status
indication:
indication:
Dither
is lit if any Dither is selected.
Noise shaping
is lit if any Noise Shaping is selected.
L/R flip
indicates that the channels are flipped.
Two
Phase
LEDs indicate if either or both channels are phase
inverted.
Gain
is lit if the setting is other than unity gain (i.e. 0dB).
Balance
is lit if the channel balance is shifted from centre.
Unlocked
is lit if the unit is not locked to a valid digital input.
Rotary encoder
Turn the knob to move up down the menu tree, adjust parameter values or edit
store names. You may select whether clockwise rotation moves the cursor up or
down - see the section on
store names. You may select whether clockwise rotation moves the cursor up or
down - see the section on
page
. The unit is shipped
with the cursor moving downwards by clockwise rotation of the knob and all
instructions in this manual refer to a unit in this configuration. We recommend
turning the knob at a steady speed, rather than trying to turn it as fast as
possible.
instructions in this manual refer to a unit in this configuration. We recommend
turning the knob at a steady speed, rather than trying to turn it as fast as
possible.