Davis DRIVERIGHT 600 8156HD Benutzerhandbuch

NOTE:

If the entered code is correct, the clear all log data

screen appears when you press MODE. If the entered

code is not correct, the word NO appears on the dis-

play. You may attempt to enter the correct code five

times before the unit returns you to the Current Read-

ings screen and activates the tamper indicator, if the

tamper indicator is enabled.

❏

Set or Change the Security Code

Use PLUS and MINUS to enter your current code (if you are
entering a security code for the first time, make sure 0000 is
entered). Press and hold SET/CLEAR until the word CHG
(change) appears on the display.

Change Security Code

Use PLUS and MINUS to enter the desired security code. When
finished, press MODE to save the new code and move to the Clear
Log Screen.

Clear Log Screen

The clear all log data screen allows you to perform a “total clear” func-
tion which erases all data for every trip in your log at once.

Clear Log Screen

NOTE:

Accident and tamper log data cannot be cleared.

CODE

SETTINGS

CLEAR LOG

SETTINGS

DR600 UG Rev B D008.fm Page 19 Thursday, April 17, 2003 7:17 AM