Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Datacard Group
  4. RL90
  5. Benutzerhandbuch

Datacard Group RL90 Benutzerhandbuch

Download
Seite von 89
Status Monitor
RP90 Plus E and RL90 User Guide
33
0104A900
MG encoder is not set correctly. Please 
turn off the printer power and set MG 
unit correctly.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104AB00
Mechanical failure happens in the MG 
encoder. Please turn off and on the 
printer power to initialize the printer.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104AC00
Hardware failure happens in the MG 
encoder. Please turn off and on the 
printer power to initialize the printer.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104AF00
Communication error happens between 
printer and MG encoder. Please turn off 
and on the printer power to initialize the 
printer.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104B900
External IC unit is not set correctly. 
Please turn off the printer power and set 
External IC unit correctly.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104BA00
Dip switch setting in the external IC unit 
is not correct. Please turn off the printer 
power and correct Dip switch setting in 
External IC unit.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104BE00
Communication error happens between 
printer and External IC unit. Please turn 
off the printer power and connect 
communication cable correctly.
1 Switch off the printer power. 
2 Connect the cable between the External IC unit 
and the printer securely.
3 Switch on the printer power.
4 If the error happens again, call for service.
0104BF00
Communication error happens between 
printer and laminator. Please turn off the 
printer power and connect 
communication cable correctly.
1 Switch off the printer power AND laminator 
power.
2 Connect the cable between the laminator and 
the printer securely.
3 Switch on the printer and laminator power. See 
 and 
.
4 If the error happens again, call for service.
0104C000
Hardware failure happens in the 
turnover unit. Please turn off and on the 
printer power to initialize the printer.
1 Turn the printer power switch off and then on.
2 If the error happens again, contact you service 
provider.
0104C100
Hardware failure of Heater Cam 
happens. Please turn off and on the 
printer power to initialize the printer.
1 Turn the printer power switch off and then on.
2 If the error happens again, call for service.
0104F000
The temperature of Retransfer Roller is 
too hot. Please turn off the printer power 
till it becomes cool enough.
1 Switch off the printer power.
2 Wait about 10 minutes for the Retransfer Roller 
to cool down.
3 Switch on the printer power.
4 If the error happens again, call for service.