BMW 2011 328i Coupe Benutzeranleitung

34

2.

Press together the top and bottom parts of 
the wind deflector until the catch engages, 
arrow 

2.

3.

Push the fastening pin, arrow

3, into the 

opening provided on the right side of the 
vehicle until it snaps into place. Remove the 
protective caps beforehand, if necessary.

4.

Push the fastening pin, arrow

4, into the 

opening provided on the left side of the 
vehicle until it snaps into place.

5.

Turn the rotary handle in the direction of 
arrow

5 as far as the first stop to insert the 

right fastening pin into the holders.

6.

Turn the rotary handle in the direction of 
arrow

6 as far as the 

symbol to insert the 

left fastening pin into the holders.

7.

Fold up the top section of the wind deflec-
tor.

With the wind deflector installed: do not 
recline the front-seat backrests too far if 

the seat is to be slid all the way back, as this 
would damage the wind deflector.

<

Only turn the rotary handle within the 
range between the two symbols; other-

wise, the cable system inside the wind deflector 
could be damaged.

<

Proceed in the reverse order as used for instal-
lation.
Protective caps are provided in the vehicle for 
the holders of the wind deflector.

Slide the red release lever towards the middle of 
the wind deflector and push the two halves 
apart.

Cargo can still be loaded on the rear seat of the 
vehicle even if the wind deflector has been 
installed.

1.

Lower all windows.

2.

Fold down the top section of the wind 
deflector, arrow

1.

Online Edition for Part no. 01 41 2 604 304 - © 02/10 BMW AG