BMW 2009 M3 Sedan Benutzeranleitung

Seite von 246
Under the hood
196
Viscosity ratings
Viscosity is a measure of an oil's flow rating and 
is categorized in SAE classes.
Approved oils belong to the 10W-60 SAE 
class.
<
Alternative oil types
If BMW High Performance Synthetic Oil is not 
available, you can add small quantities of other 
synthetic oils in between oil changes. Only use 
oils with the following specifications:
>
Viscosity:
preferred: SAE 10W-60;
alternative: SAE 10W-40, SAE 5W-50 or 
SAE 10W-50
>
Specification:
API SJ/CF, API SK/CF or higher
Low ambient temperatures
The oils used at BMW factories for your vehicle 
type are suitable for virtually any ambient tem-
perature. However, if the vehicle is operated at 
temperatures below –4
7/–206 for extended 
periods, your BMW center will be glad to rec-
ommend an optimal oil.
Coolant
Do not add coolant to the cooling system 
when the engine is hot. Escaping coolant 
can cause burns.
<
Coolant consists of half water and half additive. 
Not all commercially available additives are suit-
able for your BMW. Ask your BMW center for 
suitable additives.
Only use suitable additives, otherwise 
engine damage may result. Because 
additives are harmful to your health, it is impor-
tant to follow the instructions on the contain-
ers.
<
Comply with the appropriate environ-
mental protection regulations when dis-
posing of coolant additives.
<
Checking coolant level
1.
Do not open the engine hood before the 
engine has cooled down.
2.
Turn the cap of the expansion tank a little 
counterclockwise to allow any accumulated 
pressure to escape, then continue turning 
to open.
3.
The coolant level is correct if it is between 
the maximum and minimum marks in the 
filler neck, refer also to the diagram next to 
the filler neck.
4.
If the coolant is low, slowly add coolant up to 
the specified level; do not overfill.
5.
Turn the cap until there is an audible click.
6.
If the loss of coolant is substantial, have the 
cause eliminated as soon as possible.
ba8_E90M3_cic.book  Seite 196  Dienstag, 19. August 2008  11:51 11
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG