BMW 2009 M3 Sedan Benutzeranleitung

 87

The LED next to the symbol for automatic head-
lamp control flashes. Adaptive Head Light is 
malfunctioning or has failed. Have the system 
checked as soon as possible.

1 High beams
2 Headlamp flasher
3 Roadside parking lamps

There is an additional option of switching on the 
lamps on the side of the car facing the road 
when parked.

After parking the vehicle, press the lever up or 
down beyond the pressure point for a longer 
period, arrow 

3.

The roadside parking lamps drain the bat-
tery. Therefore, do not leave them on for 

unduly long periods of time, otherwise the bat-
tery might not have enough power to start the 
engine.

<

Press the lever in the opposite direction to the 
pressure point, arrow 

3.

You can adjust the brightness of the instrument 
lighting only when the parking lamps or the low 
beams are switched on.

1.

Push button 

1 in the turn indicator lever up 

or down repeatedly until the appropriate 
symbol appears in the display, accompa-
nied by the brightness level and the word 
"SET".

2.

Press button 

2.

3.

Push button 

1 up or down to select the 

desired brightness level.

4.

Press button 

2.

The display again shows the outside tem-
perature and the time.

The interior lamps, footwell lamps

, entry 

lamps

, cargo bay lamp and courtesy lamps

are controlled automatically.
The LEDs for the courtesy lamps

are set in the 

door handles and illuminate the ground in front 
of the doors.

To avoid draining the battery, all lamps 
inside the car are switched off about 

ba8_E90M3_cic.book  Seite 87  Dienstag, 19. August 2008  11:51 11

Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG