BMW 2009 650i Coupe Benutzeranleitung

Seite von 272
Driving
66
Triple turn signal activation
Press the lever to the resistance point; the turn 
signal flashes three times.
You can activate or deactivate this function.
iDrive, for operating principle refer to page
.
1.
Press the 
button.
This opens the start menu.
2.
Press the controller to open the   menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the 
controller until "Lighting" is selected and 
press the controller.
6.
Select "Triple turn signal" and press the 
controller.
 Triple turn signaling is activated.
The setting is stored for the remote control cur-
rently in use.
Wiper system
Switching on wipers
Switching off wipers or brief wipe
Activating/deactivating rain sensor
Cleaning windshield, headlamps and 
BMW Night Vision camera
*
Adjusting rain sensor sensitivity level
Switching on wipers
Pull the lever upward, arrow
1.
The lever automatically returns to its initial posi-
tion when released.
Normal wiper speed
Press once. 
The system reverts to operation in the intermit-
tent mode when the vehicle is stationary.
Fast wiper speed
Press twice or press beyond the resistance 
point. 
The system reverts to normal speed when the 
vehicle is stationary.
Rain sensor
The wiper operation is controlled automatically 
as a function of the rain intensity. The rain sen-
sor is located on the windshield, directly in front 
of the interior rearview mirror.
Activating rain sensor
Press the button, arrow
3. The LED in the but-
ton lights up.
Adjusting rain sensor sensitivity level
Turn the knurled wheel
5.
Deactivating rain sensor
Press the button
 again, arrow 3. The LED goes 
out.
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG