BMW 2008 650i Coupe Benutzeranleitung
231
With tow rope
When starting off in the towing vehicle, make
sure that the tow rope is taut.
sure that the tow rope is taut.
To avoid jerking and the associated
stresses on vehicle components when
stresses on vehicle components when
towing, always use nylon ropes or nylon straps.
Attach tow ropes to the tow fittings only, as
attachment to other vehicle parts can lead to
damage.
Attach tow ropes to the tow fittings only, as
attachment to other vehicle parts can lead to
damage.
<
With tow truck
Have the BMW transported with a tow truck
with a so-called lift bar or on a flat bed.
with a so-called lift bar or on a flat bed.
Tow-starting
Do not tow-start the vehicle if possible, but
instead start the engine by means of jump start-
ing, refer to page
instead start the engine by means of jump start-
ing, refer to page
. Vehicles equipped with a
catalytic converter should only be tow-started
when the engine is cold. When equipped with a
sport automatic transmission, the engine can-
not be started by tow-starting.
when the engine is cold. When equipped with a
sport automatic transmission, the engine can-
not be started by tow-starting.
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
comply with country-specific regulations.
2.
Switch on the ignition, refer to page
.
3.
Shift into 3rd gear.
4.
Tow-start with the clutch completely
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
5.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
bar or rope and switch off the hazard warn-
ing flashers.
6.
Have the vehicle checked.
Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG