BMW 2008 650i Coupe Benutzeranleitung
63
the transmission lock after parking the vehicle
at its destination.
at its destination.
Releasing
1.
Unclip the sleeve of the selector lever.
2.
Pull the sleeve up over the selector lever.
3.
Reach into the trim-piece opening, arrow
1,
and firmly pull the trim piece upward,
arrow
arrow
2.
4.
Remove cover over the opening, refer to 5.
5.
Insert a screwdriver from the onboard tool
kit, refer to page
kit, refer to page
, into the opening,
arrow
1.
6.
Pull the screwdriver toward the rear until it is
heard to engage, arrow
heard to engage, arrow
2, and leave it
inserted in the opening. The transmission
lock is released.
lock is released.
Locking
1.
Pull out the screwdriver upward.
The transmission lock is locked again.
The transmission lock is locked again.
2.
Reinstall the cover and the trim piece.
Information on jump starting and towing from
page
page
.
Turn signals/
headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
2 Headlamp flasher
3 Turn signals
Using turn signals
Move the lever beyond the resistance point.
To switch off manually, only press the lever to
the resistance point.
To switch off manually, only press the lever to
the resistance point.
Atypically rapid flashing of the indicator
lamp indicates the failure of a turn signal
lamp indicates the failure of a turn signal
lamp.
<
Signaling briefly
Press the lever to the resistance point and hold
it there as long as you wish to signal.
it there as long as you wish to signal.
Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG