BMW 2007 750i Sedan Benutzeranleitung

107

riv

g ti

uni

iga

lity

The interior temperature, air volume, and air
distribution can be set starting from the radio
ready state.

Switching cooling function on and off

manually

When activated, the air conditioner
mode cools and dehumidifies the
incoming air, reheating it as

required, depending on the temperature set-
ting. Depending on the weather, the windshield
may fog over briefly when the engine is started.
The cooling function is switched on automati-
cally with the AUTO program. The passenger
compartment can only be cooled with the
engine running.

Rear window defroster

The rear window defroster
switches off automatically after a
while. Depending on your equip-

ment package, the upper wires are used as an
antenna and are not part of the rear window
defroster.

Front ventilation

1 Knurled wheels for smoothly opening and

closing the air vents

2 Knurled wheels for changing airflow direc-

tion

Ventilation for cooling

Adjust the vents to direct the flow of cool air in
your direction, for instance, if the interior has
become too warm, etc.

Draft-free ventilation

Set the vent outlets so that the air flows past
you and is not directed straight at you.

Ventilation in rear

1 Knurled wheel for smoothly opening and

closing the air vents

1 Knurled wheels for smoothly opening and

closing the air vents

2 Levers for changing airflow direction
3 Knurled wheels

for setting temperature:

Turn toward blue: colder

Turn toward red: warmer

Microfilter/activated-charcoal filter

The microfilter removes dust and pollen from
the incoming air. The activated-charcoal filter
provides additional protection by filtering gas-
eous pollutants from the outside air. Your BMW
center replaces this combined filter as a stan-
dard part of your scheduled maintenance.
You can select a display of more detailed infor-
mation in the service required display, refer to
page