BMW 2005 325Ci Coupe Benutzeranleitung
55
If the safety belt system has been
subjected to the stresses involved
subjected to the stresses involved
in an accident or otherwise damaged:
have the entire safety belt mechanism
replaced by your BMW center, includ-
ing the safety belt tensioner. In addi-
tion, have your BMW center inspect the
safety belt anchors. If a child-restraint
system was in the vehicle during an
accident, consult the manufacturer's
instructions regarding replacement.
have the entire safety belt mechanism
replaced by your BMW center, includ-
ing the safety belt tensioner. In addi-
tion, have your BMW center inspect the
safety belt anchors. If a child-restraint
system was in the vehicle during an
accident, consult the manufacturer's
instructions regarding replacement.
<
Seat and mirror memory*
You can store and recall three different
driver's seat and exterior mirror posi-
tions.
driver's seat and exterior mirror posi-
tions.
The lumbar support settings are
not stored in the memory.
not stored in the memory.
<
To store
1. Ignition key position 1 or 2
2. Select the desired seat and exterior
2. Select the desired seat and exterior
mirror positions
3. Press the M
EMORY
button: the indica-
tor lamp in the button lights up
4. Press memory button 1, 2 or 3, as
desired: the indicator lamp goes out.
To select a stored setting
Do not select a memory position
while the vehicle is moving. If you
while the vehicle is moving. If you
do so, there is a risk of accident from
unexpected seat movement.
unexpected seat movement.
<
Ignition key in position 1:
> Briefly press memory button 1, 2 or 3,
> Briefly press memory button 1, 2 or 3,
as desired.
Movement stops immediately when
one of the seat-adjustment or mem-
ory buttons is activated during the
adjustment process.
Movement stops immediately when
one of the seat-adjustment or mem-
ory buttons is activated during the
adjustment process.
The driver's door is closed and the igni-
tion key is either removed or in position
0 or 2:
> Maintain pressure on the desired
tion key is either removed or in position
0 or 2:
> Maintain pressure on the desired
memory button – 1, 2 or 3 – until the
adjustment process is completed.
adjustment process is completed.
If you press the M
EMORY
button acci-
dentally: press the button again; the
indicator lamp goes out.
indicator lamp goes out.
You can have this feature pro-
grammed so that when you use
grammed so that when you use
the remote control from your personal-
ized key to unlock your door, your seat
and the exterior mirrors will move into
your own preferred positions.
ized key to unlock your door, your seat
and the exterior mirrors will move into
your own preferred positions.
<
Safety belts
Overview
Controls
Maintenance
Repairs
Data
Index
Online Edition for Part-No. 01 41 0 158 118 - © 03/04 BMW AG