BMW 2004 X3 3.0i SAV Benutzeranleitung

Seite von 132
 105
Mounting compact wheel
1.
Unscrew the lug bolts and remove the 
wheel 
2.
Remove accumulations of mud or dirt 
from the mounting surfaces of the 
wheel and hub. Clean the lug bolts 
3.
Position the new wheel or compact 
wheel. Secure the wheel by turning at 
least two lug bolts into opposite bolt 
holes
4.
Screw in the remaining lug bolts. 
Tighten all the bolts securely in a diag-
onal pattern
5.
Lower the jack and remove it from 
beneath the vehicle
6.
Tighten the lug bolts in a diagonal pat-
tern
7.
Check and correct the tire inflation 
pressure at the earliest opportunity.
Protect valve stems and valve stem 
seal caps against dirt and contamina-
tion. Dirt in valve stems is a frequent source 
of gradual air loss.
<
 
After mounting the compact wheel or cor-
recting the inflation pressure, reinitialize 
the Flat Tire Monitor, refer to page 
The vehicle jack is designed for 
changing wheels only. Do not attempt 
to raise another vehicle model with it or to 
raise any load of any kind. To do so could 
cause accidents and personal injury.
To ensure safety, always have the lug bolts 
checked with a calibrated torque wrench to 
ensure that they are tightened to the spec-
ified torque of 101 lb ft/140 Nm as soon as 
possible.
<
 
Stow the defective wheel in the luggage 
compartment.
When you mount wheels other than Genu-
ine BMW light-alloy wheels, different lug 
bolts may also be required. 
Replace the defective tire as soon as pos-
sible and have the new wheel/tire bal-
anced. 
Driving with the compact wheel
Drive reservedly and do not exceed a 
speed of 50 mph/80 km/h. Do not 
deactivate DSC, as otherwise unstable 
driving conditions may result.
<
The driving characteristics change, for 
example reduced track stability on braking, 
extended braking distance, and altered 
self-steering characteristics in the limit 
range. In conjunction with winter tires, 
these characteristics are more pro-
nounced. 
Only one compact wheel may be 
mounted. You should re-equipping to 
wheels and tires of the original size as 
quickly as possible.
<
Battery
Battery care
The battery is 100 % maintenance-free, i.e., 
the electrolyte will last for the life of the bat-
tery when the vehicle is operated in a tem-
perate climate. 
Please contact your BMW Sports 
Activity Vehicle Center with any ques-
tions concerning the battery.
<
 
Do not disconnect the battery when 
the engine is running. If you  do so, the 
ensuing voltage surge will damage the 
vehicle's onboard electronics.
<
Indicator lamp
The battery charge-current indica-
tor lamp lights up:
The battery is no longer being 
charged. There is a defect on the alternator 
V-belt or charge current circuit of the alter-
nator. Contact the nearest BMW Sports 
Activity Vehicle Center.
Do not continue driving if the V-belt is 
defective. The engine could be dam-
aged due to overheating. 
Moreover, an increased amount of force is 
required for steering if the onboard supply 
voltage falls dramatically.
<
 
Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG