BMW Automobile 325xi Benutzeranleitung

Seite von 160
 51
ventional cruise control systems which you may 
be accustomed to, you are strongly urged to 
read all of the pages relating to this system 
before use. Pay special attention to the System 
limitations sectio
n beginning on page
.
Braking sensation
The system's automatic brake operation results 
in a braking sensation that is slightly different 
from what you feel when you brake the vehicle 
yourself in a similar situation. Possible noises 
during automatic deceleration are normal.
Manual transmission
You can shift gears while cruise control is acti-
vated. An indicator lamp notifies you that you 
should shift gears when you drive for an 
extended period at very high or very low engine 
speeds, or the system is deactivated.
Range of applications
The minimum desired speed is 20 mph or 
30 km/h, and the maximum desired speed is 
110 mph or 180 km/h.
As with conventional cruise control sys-
tems, active cruise control in no way 
diminishes or substitutes for the driver’s own 
personal responsibility, alertness and aware-
ness in adjusting speed, braking or otherwise 
controlling the vehicle. The driver should 
decide when to use the system on the basis of 
road, traffic, visibility, and weather conditions. 
Active cruise control is intended for use on 
highway-type roadways where traffic is moving 
relatively smoothly. Do not use this system in 
city driving; heavy traffic such as during rush 
hour; on curvy, winding roads, slippery roads or 
roads with sharp curves such as highway off-
ramps; during inclement weather such as snow, 
strong rain or fog; or when entering inter-
changes, service/parking areas or toll booths. 
It is also important to regulate your vehicle's 
speed and distance setting within applicable 
legal limits. Always be ready to take action or 
apply the brakes if necessary, especially when 
the system is actively following a vehicle in front 
of you. Otherwise, driving conditions could 
result which violate the law or pose a risk of 
accident.
<
One lever for all functions
Store and increase desired speed
Store and decrease desired speed
Deactivate system, refer to page
Resume stored desired speed and dis-
tance, refer to page
Select distance to vehicle driving ahead, 
refer to page
Maintaining current speed
Briefly press the lever, arrow 
1, or briefly pull it, 
arrow 
2, at a driving speed of more than approx. 
20 mph or 30 km/h.
The car's current speed is stored and main-
tained. It is displayed in the speedometer and 
briefly in the instrument cluster.
On uphill gradients, it may prove impossible to 
maintain the set speed if current engine power 
output is insufficient. If the engine braking 
effect is insufficient on downhill slopes, the sys-
tem will brake the vehicle slightly.
Online Edition for Part-No. 01 41 0 012 353 - © 03/06 BMW AG