BMW 2015 428i Convertible Benutzeranleitung
row 1 and the inner part onto the centering
component, arrow 2. Make sure that the
tail lamp engages in the rubber mount.
component, arrow 2. Make sure that the
tail lamp engages in the rubber mount.
4.
Screw the tail lamp on with the two nuts.
5.
Mount the cover.
Lights in the trunk lid
General information
Reversing lights: 16-watt bulb, PW16W.
Inner brake lights: 21-watt bulb, H21W
Inner brake lights: 21-watt bulb, H21W
Accessing the lights
1.
Use the screwdriver from the onboard ve‐
hicle tool kit to loosen and completely re‐
move the two screws on the cover, arrow.
hicle tool kit to loosen and completely re‐
move the two screws on the cover, arrow.
2.
Remove the released cover.
Replacing the reversing lamp and inner
brake lamp
brake lamp
1.
Loosen the bottom holder, arrow 1.
2.
Loosen the top holder, arrow 2. To do so,
press in the middle latch and then press
out both outside latches.
Remove the lamp holder, arrow 3.
press in the middle latch and then press
out both outside latches.
Remove the lamp holder, arrow 3.
3.
Unscrew the defective bulb of the revers‐
ing or brake lamp from its socket counter‐
clockwise.
ing or brake lamp from its socket counter‐
clockwise.
4.
Insert the new bulb.
Installing the bulb holder
1.
Insert the two contacts, arrow 1, into the
connections, arrow 2.
connections, arrow 2.
2.
Press on the bulb holder, arrow 3. Make
sure that the two exterior holders latch into
place.
sure that the two exterior holders latch into
place.
3.
Reattach the two covers to the trunk lid.
Rear lamp, license plate lamp and
central brake lamp
.
Seite 212
Mobility
Replacing components
212
Online Edition for Part no. 01 40 2 960 547 - II/15