BMW 01 41 0 155 307 Benutzerhandbuch
![BMW](https://files.manualsbrain.com/attachments/59bff3c21d02c686320f922a23b4f0fd8e167e8d/common/fit/150/50/d22aabf2d062b824edd261b72ebf0e854c720c7e6ff4ab10933d93100f3a/brand_logo.png)
22
n
Indicator and warning lamps
Yellow: check as soon as possible
Antilock Brake System (ABS)
●
ABS has been deactivated in
response to system malfunction.
response to system malfunction.
Conventional braking efficiency is avail-
able without limitations. Please have
the system inspected by your BMW
center.
For additional information, refer to
page
able without limitations. Please have
the system inspected by your BMW
center.
For additional information, refer to
page
.
ABS warning lamp for Canadian
models.
models.
Engine oil level
Comes on while driving: the oil
level is at the absolute
Comes on while driving: the oil
level is at the absolute
minimum; refill as soon as possible. Do
not drive more than approx. 30 miles
(50 km) until you add oil.
For additional information, refer to
page
not drive more than approx. 30 miles
(50 km) until you add oil.
For additional information, refer to
page
.
Engine oil level
Comes on after the engine has
been shut off: add oil at the
Comes on after the engine has
been shut off: add oil at the
Brake pads
●
Have the brake pads checked.
For additional information, refer
For additional information, refer
.
Tire Pressure Control (RDC)
●
.
Automatic Stability Control plus
Traction (ASC+T)/Dynamic
Stability Control (DSC)
Traction (ASC+T)/Dynamic
Stability Control (DSC)
●
Indicator lamp flashes:
The system is active and governs drive
force and braking force.
The indicator lamp remains on:
ASC+T has been switched off via the
button or it is defective, or the DSC has
been switched off, the ADB is opera-
tional.
In the event of a fault, please consult
the nearest BMW center.
For additional information, refer
page
The system is active and governs drive
force and braking force.
The indicator lamp remains on:
ASC+T has been switched off via the
button or it is defective, or the DSC has
been switched off, the ADB is opera-
tional.
In the event of a fault, please consult
the nearest BMW center.
For additional information, refer
page
BMW 325xi:
The DSC has been either turned off or
is defective. ADB-X is in ready mode. If
the warning lamp does not go out after
pressing the DSC button repeatedly,
then the both the DSC and ADB-X are
defective.
Please consult the nearest BMW
center.
For additional information, refer to
page
The DSC has been either turned off or
is defective. ADB-X is in ready mode. If
the warning lamp does not go out after
pressing the DSC button repeatedly,
then the both the DSC and ADB-X are
defective.
Please consult the nearest BMW
center.
For additional information, refer to
page
Automatic Stability Control plus
Traction (ASC+T)/Dynamic
Stability Control (DSC) and
brake warning lamp
Traction (ASC+T)/Dynamic
Stability Control (DSC) and
brake warning lamp
●
The indicator lamps remain on:
The DSC
The DSC
and ADB/DBC are
switched off by means of the button or
are defective.
Please consult the nearest BMW
center.
For additional information, refer to
page
are defective.
Please consult the nearest BMW
center.
For additional information, refer to
page
.
BMW 325xi:
DSC and ADB-X are defective.
ADB-X cannot be switched off.
Please consult the nearest BMW
center.
For additional information, refer to
page
DSC and ADB-X are defective.
ADB-X cannot be switched off.
Please consult the nearest BMW
center.
For additional information, refer to
page
.
DSC and ADB/ADB-X/DBC indi-
cator and warning lamps for
Canadian models.
cator and warning lamps for
Canadian models.
Add washer fluid
The washer fluid level is too low.
Top up at the earliest opportu-
The washer fluid level is too low.
Top up at the earliest opportu-
Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG