B&B Electronics EIR508 Series Merkblatt
EIR508 Series-5107qsg
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104
www.bb-elec.com
orders@bb-elec.com
support@bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445
www.bb-europe
.com orders@bb-europe.com support@bb-europe.com
1
2
3
4
5
o
Ethernet Switch
o
CD with Support Manual
o
This Quick Start Guide
o
Panel Mount Bracket
o
IP Address: 192.168.16.1
o
Subnet Mask: 255.255.255.0
o
Gateway: 192.168.16.254
o
User Name: root, Password: root
o
Record the switch’s MAC Address in the space
provided. The MAC Address is printed on the product
label. Provide the MAC Address to your Network
Administrator. The Network Administrator should
provide an IP Address, Subnet Mask, and Gateway.
provided. The MAC Address is printed on the product
label. Provide the MAC Address to your Network
Administrator. The Network Administrator should
provide an IP Address, Subnet Mask, and Gateway.
o
Select a mounting location and install with the attached
DIN rail clip or included panel mount kit.
DIN rail clip or included panel mount kit.
o
Connect power to the switch
o
12 to 48 VDC
o
Redundant DC input is available with fault
contacts.
contacts.
Pos
Status Description
OFF
OFF
Disable port 1 Alarm
1
ON
Enable port 1 Alarm
(If port 1 link fails, the fault LED will light)
OFF
Disable port 2 Alarm
2
ON
Enable port 2 Alarm
(If port 2 link fails, the fault LED will light)
(If port 2 link fails, the fault LED will light)
OFF
Disable port 3 Alarm
3
ON
Enable port 3 Alarm
(If port 3 link fails, the fault LED will light)
(If port 3 link fails, the fault LED will light)
OFF
Disable port 4 Alarm
4
ON
Enable port 4 Alarm
(If port 4 link fails, the fault LED will light)
(If port 4 link fails, the fault LED will light)
OFF
Disable port 5 Alarm
5
ON
Enable port 5 Alarm
(If port 5 link fails, the fault LED will light)
(If port 5 link fails, the fault LED will light)
OFF
Disable port 6 Alarm
6
ON
Enable port 6 Alarm
(If port 6 link fails, the fault LED will light)
(If port 6 link fails, the fault LED will light)
OFF
Disable port 7 Alarm
7
ON
Enable port 7 Alarm.
(If port 7 link fails, the fault LED will light)
(If port 7 link fails, the fault LED will light)
OFF
Disable port 8 Alarm
8
ON
Enable port 8 Alarm
(If port 8 link fails, the fault LED will light)
(If port 8 link fails, the fault LED will light)
OFF
Disable the ring master function.
9
ON
Enable the switch as the ring master
in the redundant ring group.
in the redundant ring group.
LED Status
Meaning
Green
The Switch is powered on
Power
Off
The Switch is powered off
Green
Power Source 1 is available
Power 1
Off
Power Source 1 is unavailable
Green
Power Source 1 is available
Power 2
Off
Power Source 2 is unavailable
Yellow
Power Source failure or Port Failure
Fault
Off Normal
Operation
Green
Ring Master (Master of a redundant ring)
R.M.
Off
The switch is not a Ring Master
Green
The port is linked
Blinking
The port is receiving or transmitting packets
LNK/ACT
Ports 7 & 8
Ports 7 & 8
Off
No device attached
Yellow
Full Duplex Mode
Blinking Data
Collision
FDX/COL
Ports 7 & 8
Ports 7 & 8
Off
Half Duplex Mode
Green
10/100 Ports
Yellow
Quick Start Guide
Elinx Managed Ethernet Switch
EIR508 Series
Items Included
Default Settings
DIP Switch Settings
LED Chart
Hardware Installation