Brother NC-9100H Benutzerhandbuch

CONFIGURING INTERNET PRINTING FOR WINDOWS

®

 5 - 8

Select the desired model of the remote printer (for example, 
Brother HL-series). If necessary, click Have Disk to load the 
driver from the CD-ROM. Click Next when you are done.

If you have selected a printer driver that is already being used, you 
have the option of either keeping the existing driver (recommended) 
or replacing it. Select the desired option and press Next.

Select the Brother Internet port (BIP...) which you selected in 
step 6 and press Next.

Select the Brother Internet port (BIP...) which you selected in 
step 6 and press Next.

Select the desired model of the remote printer (for example, 
Brother HL-series). If necessary, click Have Disk to load the 
driver from the CD-ROM. Click Next when you are done.

If you have selected a printer driver that is already being used, 
you have the option of either keeping the existing driver 
(recommended) or replacing it. Select the desired option and 
press Next.

Enter any desired name for the BIP remote printer and press 
Next. Note that this name does not need to match the port name 
that you assigned in step 6, or E-mail address that you assigned 
in step 9. 

Select No when asked if you want to print a test page, unless 
you have already configured the remote Print/Fax server to 
receive BIP print jobs.

You have now finished installing the BIP software. If you need to 
configure another remote Print/Fax server, go to the next section, 
“Adding a Second Brother Internet Port”.