Brother MFC-9660 Benutzerhandbuch
44
Chapter 7
Switching ON Remote Activation and Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation Code is
5 1.
The preset Deactivation Code is # 5 1.
To switch Remote Activation ON and change Remote Codes
1
Press Menu, 2, 1, 4.
2
Press
or
to select ON (or OFF), and press Set when the screen displays the setting you
want.
3
If you want to, enter a new Remote Activation Code, then press Set.
4
If you want to, enter a new Remote Deactivation Code, then press Set.
5
Press Stop/Exit.
Telephone Services
BT Call Sign (For U.K. Only)
This machine feature lets you use the BT Call Sign subscriber service which allows you to have at
least two separate telephone numbers on one phone line. Each phone number has its own distinctive
ringing pattern, so you know which phone number is ringing. This is one way you can have a
separate phone number for the machine.
least two separate telephone numbers on one phone line. Each phone number has its own distinctive
ringing pattern, so you know which phone number is ringing. This is one way you can have a
separate phone number for the machine.
The machine has a BT Call Sign compatible distinctive ringing function, allowing you to dedicate a
second phone number (on the same phone line) just for receiving faxes.
second phone number (on the same phone line) just for receiving faxes.
To enable the machine to work with BT Call Sign
1
Set the machine to MANUAL mode by pressing Mode.
2
Press Menu, 2, 0, 4. The screen displays the current setting of this feature.
3
Press
or
to select ON (or OFF).
4
Press Set.
5
Press Stop/Exit.
If you are always disconnected when accessing your external TAD remotely, try
changing the Activation Code from
changing the Activation Code from
5 1 to # # # and the Deactivation Code from
# 5 1 to 1 1 1. You cannot use the same number for the Activation Code, the
Deactivation Code and the Remoto Access Code.
Deactivation Code and the Remoto Access Code.
You can switch it off temporarily, then turn it back on. When you get a new fax
number, make sure you reset this function.
number, make sure you reset this function.
•
To have your external TAD answer only the main number, the machine
must be in Manual Mode.
must be in Manual Mode.
•
In FAX/TEL (F/T) or FAX ONLY mode, the machine will answer all numbers
on the phone line.
on the phone line.