Brother FAX-775Si Anleitung Für Quick Setup

      S E T U P   S E N D

You can scan a fax into the fax machine’s memory to be sent as soon as the scan is 
complete.  This way, you don’t have to wait for the entire fax to be transmitted before 
you retrieve your original.

If you get an 

 message while scanning the first page of a fax, 

press   Stop/Exit to cancel the scan.  If you get an 

 message 

while scanning in a subsequent page, you’ll have the option to press Fax Start to 
transmit the pages scanned so far, or to press Stop/Exit to cancel the Quick Scan 
operation.

Place the original face down in the ADF.

Press Quick-Scan.  The LCD indicates how much memory is available.

Enter the fax number.

Press Fax Start to begin scanning the document into memory.  Once the scan is 
complete, the fax machine dials the call.

If your original is very light or very dark, you might want to set the contrast accordingly. 
Use 

 to send a very light original. Use 

 to send a very dark original.

Place the original face down in the ADF.

Press Menu/Set, 3, 3.

Press 

 to select 

, 

 or 

, and then press Menu/Set.

Press 2 if you are finished choosing settings, and go to Step 5—OR—Press 1 if you 
want to select additional settings. The display returns to the Setup Send menu.

Enter a fax number, and then press Fax Start to send a fax—OR—Press Copy to 
make a copy.

When you have an original in the ADF, you can use the Resolution key. Press 
Resolution continuously until you see your selection on the LCD.

—suitable for most typed originals.

—good for small print; transmits a little slower than standard resolution. 

—good for small print or artwork; transmits slower than fine resolution.

—use when original has varying shades of gray; slowest transmission time.

3.CONTRAST

or