Bosch 24" Compact Vented Dryer Axxis WTV76100CN Benutzeranleitung

18

Operation

Using the dryer

1. Open the door.

2. Check lint filter.

The filter should be cleaned 

after and before every drying 

process. Cleaning the filter 

reduces the drying time and 

saves energy.

3. Rotate program selector to the 

desired program. Select the 

program which corresponds to 

the laundry in the dryer from 

the program selection table 

(see page 26).

The Start/Stop indicator light starts 

flashing.

Lint filter indicator flashes for 

5 seconds – Check lint filter!

4. If required, select 

Delicates 

low temp. by pressing the 

button.

See explanation on page 17.

5. Place laundry in the empty 

drum. Put each piece of 

laundry into the machine 

separately.
For best results the laundry to 

be dried must be sorted 

according to type of laundry 

and desired degree of drying.

For further information see 

page 16.

Observe drying symbols of the 

laundry manufacturer.

Ensure that there is only laundry in 

the drum. Check that all items are 

completely in the drum.

6. Close the door.

If the door has not been 

closed properly, the dryer will 

not start.

7. Press the 

Start/Stop button.

The Start/Stop indicator light 

illuminates.

If an automatic program has been 

selected, the indicator lights 

indicate the progress of the 

program sequence.

At the end of the program 

sequence Damp dry is emitted 

(if set).

At program end the LED 
Wrinkle block/End illuminates.
When the drying process is 

complete (program or 

selected time program 

ended), the drum rotates at 

specific intervals. This prevent 

the laundry from creasing.

8. Open the door.
9. Take the laundry out of the 

dryer.

10. Rotate the program selector 

to Off.

The dryer light goes out.

11. Clean the filter.

The filter should be cleaned 

after each drying process. 

Cleaning the filter reduces the 

drying time and saves energy.

12. Close the door.