Bosch Appliances Security Camera PT-400 Benutzerhandbuch

Security Escort | Technical Reference Manual | 3.0  System Menus 
and Screens 

EN | 67 

 

 

Bosch Security Systems | 6/12 | 38947D 

 

Local Escort Path: The path on this 
workstation the Security Escort was 
installed in. Typically, it is 
C:\ESCORT. 
Backup/Restore to Disk Cartridge Path 
When backing up or restoring the 
databases to a disk cartridge use this 
path. 
Subscriber Image File Path 
The Security Escort System software can 
display an image for each subscriber on 
the alarm screen. This parameter tells 
the software the path to where the 
image files are stored. The default is 
C:\ESCORT\IMAGES. 
Subscriber Image Extension 
The subscriber images can be in JPEG or 
Windows Bitmap format. All images in a 
system must be in the same format. For 
the JPEG format, enter the Windows 
extension JPG. For the Bitmap format, 
enter the Windows extension BMP. 
Subscriber Image Scaling % 
When the display is set to 640 by 480 
pixels and subscriber images are being 
displayed, this parameter controls the 
image size. This value can range from 
10% to 100% and should be adjusted 
while viewing alarms to get the desired 
image size. When the display is set to 
800 by 600 or larger (recommended), 
this parameter has no effect. 
3.5.2 Network Socket Status Screen 
This screen shows diagnostic 
information for the selected TCP/IP 
socket.

 

 

Successful Incoming Messages 
This value is the number of messages 
the system successfully received on 
this socket. 
Incoming Communication Errors 
This value is the number of messages 
the system detected errors in, on this 
socket. If displayed in yellow, this 
value is more than 1.5% of the 
Successful Incoming Messages. 
Incoming Retried Messages 
This value is the number of successful 
receptions that indicated that the 
sending application retried. If 
displayed in yellow, this value is more 
than 1.5% of the Successful Incoming 
Messages. 
Total Outgoing Messages 
This value is the total number of 
outgoing messages that were sent on 
this socket. 
Outgoing Retried Messages 
This value is number of outgoing 
messages that must be retried because 
the receiving application did not 
acknowledge them. If displayed in 
yellow, this value is more than 1.5% of 
the Total Outgoing Messages. 
Receive Buffer Max 
This value is the maximum number of 
bytes that were received on this serial 
port, but not yet processed by the 
system. If displayed in yellow, more 
than 50% of the queue was in use.