Bolens 452 Thru 465 Servicehandbuch

IMPORTANT: This unit is shipped without gasoline or oil 
in the engine. Be certain to service engine with gasoline 
and oil as instructed in the separate engine manual 
before operating your machine.

a.  Hopper Assembly        d. Bag
b.  Chute Deflector            e. Safety Glasses
c.  Chipper Chute              f. Engine Oil

1.  a. Remove six hex nuts and washers from the weld 

studs on the impeller housing. Do not remove the 
support plate. See Figure 3-1. 

  b. Place hopper assembly into position in front of 

impeller housing, aligning holes in hopper assembly 
collar with weld studs.

  c.  Slide hopper assembly onto weld studs and replace 

washers and hex nuts. Do not tighten completely.

2.  a. Lift hopper assembly up to impeller bracket 

assembly. 

  b. Slide the release rod out slightly to hook the hopper 

bracket onto the rod. See Figure 3-2.

  c.  Tighten the six hex nuts that secure hopper 

assembly to impeller housing and also tighten the 
hex nuts that secure hopper bracket to hopper 
assembly.

NOTE: All references 
in this manual to the 
left or right side of 
the chipper shredder 
is from the operating 
position only. Excep-
tions, if any, will be 
specified.

This unit is shipped 

without gasoline or 

oil in the engine. Be 

certain to service 

engine with gasoline 

and oil as instructed 

in the separate engine 

manual before operat-

ing your machine.

NOTE: This Operators 
Manual covers a range 
of product specifica-
tions for various 
models. Characteristics 
and features discussed 
and/or illustrated in this 
manual may not be ap-
plicable to all models. 
MTD LLC reserves the 
right to change product 
specifications, designs 
and equipment without 
notice and without 
incurring obligation.

A

B

C

A

B

A

A

B

B