Biostar I915P-A7 Benutzeranleitung

Seite von 66
I915P-A7 BIOS Manual 
 
BIOS Setup 
Introduction 
This manual discussed Award™ Setup program built into the ROM BIOS. The Setup program 
allows users to modify the basic system configuration. This special information is then stored 
in battery-backed RAM so that it retains the Setup information when the power is turned off. 
 
The Award BIOS™ installed in your computer system’s ROM (Read Only Memory) is a 
custom version of an industry standard BIOS. This means that it supports Intel Pentium 
®
 
processor input/output system. The BIOS provides critical low-level support for standard 
devices such as disk drives and serial and parallel ports. 
 
Adding important has customized the Award BIOS™, but nonstandard, features such as virus 
and password protection as well as special support for detailed fine-tuning of the chipset 
controlling the entire system. 
 
The rest of this manual is intended to guide you through the process of configuring your 
system using Setup. 
 
Plug and Play Support   
These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD 
(Extended System Configuration Data) write is supported. 
 
EPA Green PC Support     
This AWARD BIOS supports Version 1.03 of the EPA Green PC specification. 
 
APM Support 
These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management (APM) 
specification. Power management features are implemented via the System Management 
Interrupt (SMI). Sleep and Suspend power management modes are supported. Power to the 
hard disk drives and video monitors can be managed by this AWARD BIOS. 
 
ACPI Support
 
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface 
specification (ACPI).  It provides ASL code for power management and device 
configuration capabilities as defined in the ACPI specification, developed by Microsoft, Intel 
and Toshiba.