Binatone Concept Combo 3525 Twin Benutzerhandbuch

   

 

 

IMPORTANT:    When you purchase your phone system, all cordless

Handset registration is only necessary when you buy extra cordless or if a 

You can register additional cordless to have up to 5 handsets per base unit, 

with each handset's number (1 to 5) shown on its display.

To check whether a handset is registered, make sure mains power to the

base unit is switched on and the handset is within range. The handset's 

display should show its number and the <Antenna icon> should be steadily

on. If the display shows “

 ”, 

you need to register the handset 

again using the following process:

A cordless handset can be registered to only one base at a time. 

cordless has become faulty.

handsets are already registered to your base, so you do not need to register them.

1.   On the base station, press <MENU/OK> and <UP/DOWN> to show

REGISTRATION, and then press <MENU/OK> to put the base station into

registration mode.  The base display will show "PLEASE WAIT" and the 

base will stay in registration mode for about 2 minute, so the following

2.   Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.

PLEASE WAIT flashing.

mode with the new handset number and the <antenna icon> will stop flashing.

The handset will automatically be allocated the next available handset 

number. If the handset registration is unsuccessful, the <antenna icon> will 

still flash.

If the handset registration is successful, the display will change to standby 

3.   Press <MENU/OK> to display PIN?----.

4.   Enter the 4-digit system PIN (default is 0000).

5.   Press <MENU/OK> to confirm, and the display will show 

handset sequence must be completed within this time.