Binatone Concept Combo 3525 Twin Benutzerhandbuch

Remote operation

Using a tone-dialling phone, dial your home number

You can also use the codes on the other side of this card

While your outgoing message is playing, press

Key in your remote security code

The default code is 0000. For details of how to set a new code,

see the User Guide 9.12.6 on page 63.

Note: The <*> key can be entered during or after the OGM and the 4-digit

Note: If your answering machine is switched off, the phone will enter into

the remote access mode after 14 rings.

You can then enter the 4-digit remote access PIN

(Default Remote Access PIN is 0000) to activate the remote access feature.

PIN should follow without any delays. If the 4-digit Remote Access

PIN is entered incorrectly three times consecutively, the line will be released

automatically.

CC3525 system

1. Press <MENU/OK> and <UP/DOWN> to select

ANS. MACHINE.

Press <MENU/OK> and <UP/DOWN> to select

REMOTE ACC.

Press <MENU/OK> and <UP/DOWN> to select

ON or OFF to turn on

Press <MENU/OK> to confirm.

or off the remote access respectively.

9.12.5 Change the Compression Rate
Three different compression rates (

HIGH, MEDIUM and LOW) are provided

lower the compression rate, the higher the recording quality level attained,

1. Press <MENU/OK> and <UP/DOWN> to select

Press <MENU/OK> and <UP/DOWN> to select
Press <MENU/OK> and <UP/DOWN> to select your desired

compression rate.

for you to select different quality levels of recording incoming message. The

but the shorter the total recording time available. (LOW = 7 minutes,

MEDIUM = 10 minutes, HIGH = 15 minutes approximately.)

ANS. MACHINE.

COMPRESSION.

Press <MENU/OK> to confirm.

2. Press <MENU/OK> and <UP/DOWN> to select

TAM SETTING.

3.
4.

2. Press <MENU/OK> and <UP/DOWN> to select

TAM SETTING.

3.
4.