Bil-Jax Personal Lift ESP 19 Benutzerhandbuch

•  NEVER allow electrode contact with any part of the platform if welding is be-

ing performed from the platform. 

•  NEVER override or by-pass manufacturer's safety devices. 
•  NEVER release the travel brake or tow the lift vehicle while a person or materi-

als are on board. 

•  NEVER stand or sit on guard rails. Work only within the platform guard rail 

area and do not lean out over guard rails to perform work. 

•  NEVER attempt to increase working height with boxes, ladders, or other means. 
•  NEVER operate this equipment when exposed to high winds, thunderstorms, 

ice, or any other weather conditions that would compromise the safety of the 
operator. 

•  NEVER climb up or down masts. 
•  NEVER allow ropes, electric cords, hoses, etc. to become entangled in the 

equipment when the platform is being raised or lowered. 

•  NEVER exceed manufacturer's platform load limits and make sure all materials 

are evenly distributed over the entire platform. 

•  NEVER exceed platform load ratings by transferring loads to platform at ele-

vated heights. 

•  NEVER use guard rails to carry materials and never allow overhang of materials 

when raising or lowering platform.