Bil-Jax Personal Lift ESP 19 Benutzerhandbuch

It is recommended that Bil-Jax be contacted for assistance before removing the hydrau-
lic cylinder. 

1.  Make sure hydraulic cylinder is completely retracted and pressure is released 

from the system. Place a pan underneath the cylinder to catch the hydraulic oil. 

2.  Disconnect the hydraulic hose from the flow restrictor valve and drain the hy-

draulic oil from the cylinder. Remove the two bolts, washers, and nuts securing 
the hydraulic cylinder to the base. 

3.  Remove the plexiglass cover from the base. 

4.  Remove the mounting bolt, washer, and nut securing hydraulic cylinder to the 

lower mast. 

5.  Disconnect the two lift chains from the base mast. 

6.  Using a crane with at least one ton of lifting capacity, lift the lower mast sec-

tion high enough to remove the clamp securing the cylinder to the base. Re-
move the clamp and cylinder from the unit. 

7.  After hydraulic cylinder maintenance is completed, reinstall the cylinder in the 

reverse order of removal.