Bernina Artista 165 Anleitung Für Quick Setup

When using an electrical machine, basic safety 
precautions should always be followed, including the 
following.

Read all instructions before using this sewing computer.

1. A sewing computer should never be left unattended

when plugged in.

2. Always unplug this sewing computer from the electric

outlet immediately after using and before cleaning.

1. Do not allow to be used as a toy. Close attention 

is necessary when this sewing computer is used by or
near children.

2. Use the sewing computer only for its intended use as

described in this manual. Use only attachments
recommended by the manufacturer as contained in
this manual.

3. Never operate this sewing computer if

· it has a damaged cord or plug
· it is not working properly
· it has been dropped or damaged
· it has fallen into water

Return the sewing computer to the nearest autho-
rized BERNINA dealer or service centre for examina-
tion, repair, electrical or mechanical adjustment.

4. Never operate the sewing computer with any air 

openings blocked. Keep ventilation openings of 
the sewing computer and foot control free from 
accumulation of lint, dust and loose cloth.

5. Keep fingers away from all moving parts. Special 

care is required around the sewing needle.

6. Always use the BERNINA original stitch plate.

The wrong plate can cause the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It may 

deflect the needle causing it to break.

9. Turn power switch to «0» when making any adjust-

ments in the needle area, such as threading or chang-
ing the needle, threading the bobbin or changing 
the presser foot.

10. Always unplug the sewing computer from the electri-

cal outlet when removing covers, lubricating or when 
making any other user servicing adjustments men-
tioned in this instruction manual.

11. Never drop or insert any object into any opening.

12. Do not use outdoors.

13. Do not operate where aerosol (spray) products are 

being used or where oxygen is being administered.

14. Before disconnecting, turn all controls to the off («0») 

position then remove the plug from the outlet.

15. Do not unplug by pulling on the cord but grasp the 

plug before pulling.

16. No responsibility will be taken for any damage caused

as the result of misuse of the sewing and embroidery
computer.

17. Under no circumstances should the sewing computer

be left unattended when using the embroidery 
module.

18. For the protection of the electronic components: Do

not remove the embroidery card from the embroidery
module while embroidering.

In a double-insulated product, two systems of insulation
are provided instead of grounding. No grounding means
is provided on a double-insulated product nor should a
means for grounding be added to the product. Servicing
a double-insulated product requires extreme care and 
knowledge of the system and should only be done by
qualified service personnel. Replacement parts for a
double-insulated product must be identical to those
parts in the product. A double insulated product is 
marked with the words «DOUBLE INSULATION» or
«DOUBLE INSULATED».

The symbol         may also be marked on the product.

This sewing and embroidery computer is intended for
household use only.

1

165_170_180_SM_engl  19.04.2004  8:58 Uhr  Seite 1

 

008904.55.04_EMB_0401_a165 a170 a180_EN