Benq W7000 Benutzeranleitung

26 

Connecting with video equipment  

Using the preset and user modes

Selecting a preset mode

The projector is preset with several pre-defined picture modes so that you can choose one to suit your 
operating environment and input source picture type.

1. Press PRESET MODE repeatedly or USER 1, USER 2/ISF 

NIGHT, USER 3/ISF DAY, DEFAULT on the remote control, or 
PRESET MODE on the projector repeatedly until your desired 
mode is selected.

1. Press MENU and then press  /  until the Picture -- Basic menu 

is highlighted.

2. Press   to highlight Preset Mode.
3. Press  /  until your desired mode is selected.

These modes consist of preset values suitable for various projection 
situations as described below:

•  Cinema: With well-balanced color saturation and contrast with a 

low brightness level, this is most suitable for enjoying movies in a totally dark environment (as you 
would find in a commercial cinema). 

•  Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments 

where extra-high brightness is required, such as using the projector in well lit rooms.

•  Standard: It is slightly brighter than Cinema mode, and suitable for use in rooms where there is a 

small amount of ambient light.

•  User 1/User 2/User 3: Recalls the customized settings. See 

 for details.

Fine-tuning the selected picture mode

The pre-defined picture mode settings can be altered via the available items shown in the Picture -- 
Basic and Picture -- Advanced menus.

To fine-tune the picture mode:
1. Press MENU and then press  /  until the Picture -- Basic or Picture -- Advanced menu is 

highlighted.

2. Press   to highlight the item you want to adjust and press  /  to set your desired value. Your 

selection is automatically stored in the projector and associated with that input source.
See 

 and 

 

for details.

Each time you change the picture mode, the projector also changes the setting to the one which was last 
set for that particular picture mode on that particular input. If you change the input source, the most 
recently used picture mode and settings for that input and resolution will be restored.