Benq W1500 Benutzeranleitung

  45

  Important safety instructions

Displaying more than one image source 
simultaneously

Your projector is capable of displaying pictures simultaneously from two input sources, which can be used 
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly 
connected to the projector.

Press PIP to display the PIP page and make adjustments by following 
the steps starting from step 3 in the section 

below.

1. Press MODE/ENTER and then press  /  until the Display 

menu is highlighted.

2. Press  

to 

highlight 

PIP and press MODE/ENTER. The PIP 

page displays.

3. Highlight PIP and press  /  to select On.
The projector will select two currently active signals to display and 
the last viewed picture will be displayed on the big screen as a main 
source.

The PIP function is effective at below source combinations.

4. To change the Main Source or PIP Source, press   to highlight Main Source or PIP Source 

and press MODE/ENTER. The source selection bar displays.

5. Use  /  to highlight the source you want to display for the main (bigger) or second (smaller) 

window, and press MODE/ENTER to save the setting and go back to the PIP page.

6. To make OSD settings to one of the two sources (main or second), highlight Active Window and 

press  /  to select the source you want to make adjustments.

7. To change the position of the smaller picture, highlight Position and press  /  repeatedly until a 

suitable position is selected.

8. To resize the small picture, highlight Size and press  /  to set the PIP size among Small or Large.
9. To save the settings and leave the OSD menu, press MENU/EXIT.

Source 1/2

HDMI 1/ HDMI 2 / Wireless

PC

V

Video

V

S-Video

V

Component 1/2

V