Benq W1500 Benutzerhandbuch

Important safety instructions

Connecting component-video devices

Be sure to match the corresponding colors between the cables and the terminals. The RCA type
component video jacks are provided for connection to video output devices. You should also connect the
separate audio cable to a suitable audio amplifier.

Connecting S-Video or video devices

You need to connect only S-Video or composite Video cable from the same device, never both at the
same time. You should also connect the separate audio cable to a suitable audio amplifier.

• If you have already made a Component Video connection between the projector and the video source

device, you need not connect to this device again using an S-Video or composite Video connection as this
makes an unnecessary second connection of poorer picture quality. You need only connect using a
composite Video connection if both Component Video and S-Video are not supplied on the video source
device (for example, with some analog video cameras).

• If the selected video image is not displayed after the projector is turned on and the correct video source

has been selected, please check that the video source device is turned on and operating correctly. Also
check that the signal cables have been connected correctly.

AV equipment: DVD player, digital

tuner, etc.

From audio output

terminals

To audio input

terminals

Component video cable

From audio output

terminals

To audio input terminals

S-Video cable

Video cable

AV equipment