Benq SX912 Benutzeranleitung

Operation

35

Please refer to the illustration to the right for 
how the colors relate to each other.
For example, if you select Red and set its 
range at 0, only pure red in the projected 
picture will be selected. Increasing its range 
will include red close to yellow and red close 
to magenta.

5.

Press ▼ to highlight Saturation and adjust 
its values to your preference by pressing ◄/
►

. Every adjustment made will reflect to the 

image immediately.
For example, if you select Red and set its 
value at 0, only the saturation of pure red will be affected.

Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a 

setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be 

overpowering and unrealistic.

6.

Press ▼ to highlight Gain and adjust its values to your preference by pressing ◄/►. 
The contrast level of the primary color you select will be affected. Every adjustment 
made will reflect to the image immediately. 

7.

Repeat steps 3 to 6 for other color adjustments.

8.

Make sure you have made all of the desired adjustments.

9.

Press MENU/EXIT to exit and save the settings.

1.

Go to the Picture menu and highlight Reset Picture Settings.

2.

Press MODE/ENTER and press ▲/▼ to select Current or All.
• Current: returns current picture mode to the factory preset settings.
• All: returns all settings, except User 1/User 2 in the Picture menu to the 

factory preset settings.

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve 

better time management when giving presentations. Follow these steps to utilize this 

function:

1.

Go to the System Setup: Basic > Presentation Timer menu and press MODE/
ENTER to display the Presentation Timer page.

2.

Highlight Timer Period and decide the time period by pressing ◄/►. The length of 
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 
5-minute increments.

If the timer is already on, the timer will restart whenever the Timer Period is reset.