Benq W10000/W9000 Benutzerhandbuch

22 

Using the projector  

English

4. Other adjustments

You can adjust Brightness, Contrast, Color, and Tint settings using the Picture menu or with the remote control.

Displaying more than one image source simultaneously

There are two groups of inputs classified according to their display modes: 

Video Group: Video, and S-Video inputs.
Graphic Group: Component 1 and 2, RGBHD, and HDMI inputs.

The PIP function allows the projector to display one input from the Graphic Group within one input from the 
Video Group (G in V), or display one input from Video Group within one input from the Graphic Group (V in 
G).

The POP function allows the projector to display one input from the Graphic Group and one input from the 
Video Group side by side (G <=> V or V <=> G). 

If you want to view two images from 2 different input signals at the same time, refer to the following steps to 
display the second image.

1. Select one input source by pressing one of the Source buttons on the remote control.
2. Press PIP or POP button on the remote control.
3. Select the second signal input on the remote control.
4. You may press PIP or POP button repeatedly to choose the corresponding positions (G in V or V in G, 

G <=> V or V <=> G) of the images.

5. Toggle the ACTIVE button on the remote control to switch the active window between the two 

windows. In the active window, you are allowed to change the input signal settings.

6. To adjust the size of the PIP window, press + or -.
7. To adjust the position of the PIP window, press the ARROW buttons (c/e/d/f).
8. To turn off the PIP or POP function, select PIP Off or POP Off.
PIP --- 

POP --- 

SIZE

Sub-window

Main window

SIZE

Right window

Left window

W10000-en.book  Page 22  Thursday, October 19, 2006  1:45 PM