Benq CP220 Benutzerhandbuch
Operation
34
2. Pro-Picture menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
value)
DESCRIPTION
Auto Resize
(On)
Automatically resizes the input signal pixel resolution to the native
resolution of the projector.
resolution of the projector.
On: The pixel resolution of the input signal is converted to the native
resolution of the projector (1024 x 768). For input signals with lower
resolutions, gaps in the pixels are automatically interpolated into the
image before being projected. This may distort the image clarity.
resolution of the projector (1024 x 768). For input signals with lower
resolutions, gaps in the pixels are automatically interpolated into the
image before being projected. This may distort the image clarity.
Off: The image is projected as its original resolution, with no pixel
conversion. For input signals with lower resolutions, the projected image
will display smaller than if resized to full screen. You could adjust the
zoom setting or move the projector towards the screen to increase the
image size if necessary. You may also need to refocus the projector after
making these adjustments.
conversion. For input signals with lower resolutions, the projected image
will display smaller than if resized to full screen. You could adjust the
zoom setting or move the projector towards the screen to increase the
image size if necessary. You may also need to refocus the projector after
making these adjustments.
Aspect Ratio
(4:3)
There are two aspect ratio settings.
1. 4:3 (for a standard screen) 2. 16:9 (for a wide screen)
16:9 aspect ratio is only sourced through the Component Video input
when being fed an appropriate 16:9 aspect signal. See
when being fed an appropriate 16:9 aspect signal. See
and
for details.
H Position
(0)
Adjusts the horizontal position
of the projected image.
of the projected image.
V Position
(0)
Adjusts the vertical position of
the projected image.
the projected image.
Phase
(depends on the
selected input
source)
selected input
source)
This function allows you to adjust the clock phase
to reduce image distortion.
to reduce image distortion.
H Size
(0)
Adjusts the horizontal width of the image.
Sharpness
(15)
Adjusts the image to make it look sharper or softer.
-30
+30
-30
+30