Belkin F1DA108Z Benutzerhandbuch

27

26

Now that you have connected your console and servers to your PRO3 KVM 
Switch, it is ready for use. Select connected servers with the direct-access port 
selectors, located on the front panel of the PRO3 KVM Switch; through the 
On-Screen Display; or by using hot-key commands through the console 
keyboard. It takes approximately 1–2 seconds for the video signal to refresh 
after switching servers. Re-synchronization of the mouse and keyboard signals 
also occurs. This is normal operation and ensures that proper synchronization is 
established between the console and the connected servers.
Note: For security reasons and to conserve energy, the PRO3 KVM Switch has 
been designed to turn off the console monitor after 10 minutes of inactivity. Press 
any key on the console keyboard to turn on the monitor. If security is enabled in 
the OSD, you will be prompted to enter a user name and password. 

Switch to the next or previous port with simple, keyboard hot-key sequences 
using the “Scroll Lock” key, and either the “Up” or “Down” arrow keys. To send 
commands to the PRO3 KVM Switch, the “Scroll Lock” key must be pressed 
twice within two seconds. The PRO3 KVM Switch will beep, confirming that it is 
in hot-key mode. Next, press the “Up” arrow key and the PRO3 KVM Switch will 
switch to the previous port. Press the “Down” arrow key to switch to the  
next port.

����������������������������

������������

�������������������������������������������

With a single-switch configuration (no daisy-chained KVM switches), you can 
switch directly to any port by entering the 2-digit number of the port you wish to 
access. For example, if you press “Scroll Lock”, “Scroll Lock”, “02”, the PRO3 
KVM Switch will switch to the server on Port 2 located on BANK 00.

������������������������������