Belkin F1DA108Z Benutzerhandbuch

41

40

The mouse is lost when I switch to a different port.
•  Check that the mouse you are using is connected properly to the console port 

of the PRO3 KVM Switch.

•  Tighten any loose cable connections.
•  If you are using a mouse driver that was included with your mouse, uninstall it 

and install the standard Microsoft mouse driver.

•  Make sure the mouse works when directly plugged into the server.
•  If the server is coming out of standby mode, allow up to one minute to regain 

mouse function.

•  De-activate power-management schemes on the PC with which you are 

experiencing problems.

•  Try a different mouse.

The mouse is not detected at boot up.
•  Check the cables and make sure that they are inserted correctly.

The server boots up, but the mouse does not work.
•  Make sure the mouse is plugged in properly.
•  Make sure the mouse works when directly plugged into the server. Rebooting 

may be necessary when trying this.

•  Try a different mouse.

completely erratic.
•  Make sure you do not have more than one mouse driver installed. Make sure 

that the driver is either for a standard PS/2 or USB mouse, or a Microsoft 
server-compatible PS/2 or USB mouse.

•  Make sure you do not have any mouse drivers loaded in your “CONFIG.SYS” or 

“AUTOEXEC.BAT” files.

•  Avoid moving the mouse or pressing the mouse button when switching ports 

on the PRO3 KVM Switch.