Baumatic BCG520BL Benutzerhandbuch

Seite von 44
Gas Safety (Installation and Use) Regulations 
 
o
 
It is the law that all gas appliances are installed by competent 
persons in accordance with the current edition of the Gas Safety 
Installation and Use Regulations
  
o
 
It is in your interest and that of safety to ensure compliance with 
the law. 
 
o
 
In the UK, GASSAFE registered installers work to safe standards 
of practice. The cooker must also be installed in accordance with 
the current edition of BS 6172. Failure to install the cooker 
correctly could invalidate the warranty, liability claims and lead 
to prosecution. 
 
o
 
IMPORTANT: It is a requirement for a stability chain to be 
fitted to the appliance. Please see pages 26-27 for more 
detailed information on this.
 
 
Gas connection 
 
ALL INSTALLATION AND SERVICE WORK MUST BE 
CARRIED OUT BY A GASSAFE REGISTERED 
ENGINEER. 
 
o
 
Prior to installation, ensure that the gas supply conditions 
(nature of the gas and gas pressure) and the adjustment 
conditions are compatible. The adjustment conditions for this 
appliance are stated on the rating plate which can be found on 
the back cover. 
 
o
 
This appliance is not designed to be connected to a combustion 
product evacuation device. Particular attention should be given 
to the relevant requirements regarding ventilation. 
 
 
o
 
In compliance with the 
manufacturer’s installation 
instructions, the adaptor elbow 
should be connected to the gas 
inlet at the rear right corner of 
the appliance and pointing in a 
downward direction. As indicated 
in the diagram opposite. 
 
 
o
 
IMPORTANT: THE FIBRE WASHERS SHOWN IN THE ABOVE 
DIAGRAM MUST BE IN PLACE WHEN CONNECTING THE 
ADAPTOR ELBOW.
 
 
30