Baumatic BC391.3TCSS Benutzerhandbuch
29
o
installed by competent
rsons in accordance with the current edition of the Gas Safety
o
It is in your interest and that of safety to ensure compliance with
o
ds
tion of BS 6172. Failure to install the cooker
correctly could invalidate the warranty, liability claims and lead
r to
the separate sheet provided with the cooker that gives
ormation on how to fit the safety bracket.
e
LATION AND SERVICE WORK MUST BE
CARRIED OUT BY A GASSAFE REGISTERED
ENGINEER.
ENGINEER.
ompatible. The adjustment conditions for this
appliance are stated on the rating plate which can be found on
o
combustion
product evacuation device. Particular attention should be given
o
Connection to the cooker should be made with an approved
st be connected to the fixed elbow.
A fibre washer must be placed in the end of the feed that
Gas Safety (Installation and Use) Regulations
It is the law that all gas appliances are
pe
Installation and Use Regulations.
pe
Installation and Use Regulations.
the law.
In the UK, GASSAFE registered installers work to safe standar
of
practice. The cooker must also be installed in accordance with
the current edi
of
practice. The cooker must also be installed in accordance with
the current edi
to prosecution.
o
IMPORTANT: It is a requirement for the safety bracket
supplied with the appliance, to be fitted. Please refe
supplied with the appliance, to be fitted. Please refe
detailed inf
Gas conn ction
ALL INSTAL
o
Prior to installation, ensure that the gas supply conditions
(nature of the gas and gas pressure) and the adjustment
conditions are c
(nature of the gas and gas pressure) and the adjustment
conditions are c
the back cover.
This appliance is not designed to be connected to a
to the relevant requirements regarding ventilation.
appliance flexible connection to BS 669.
o
A fixed elbow is already connected to the gas rail.
o
A 15 mm end feed (male) mu
connects to the fixed elbow.