LG D1453WF Benutzeranleitung

• Remove the lower rack first.

• Turn the mesh filter counterclockwise.

•  Take out the mesh filter, upper STS filter and  

outer filter.

•  We recommend to clean them and run the Quick & 

Dry cycle without detergent at least once a week.

• Replace them in the reverse order.

•  If you are not using the dishwasher for a long 

time, run a Quick & Dry cycle without detergent. 

When the cycle is finished, clean the dishwasher 

according to the USER MAINTENANCE 

INSTRUCTIONS to remove the food debris at 

the bottom of the dishwasher and close the door.

•  Check that the water jet holes are not blocked.

•  If cleaning is required, remove the arm by 

pulling up.

•  Clean the spray arm and replace it pulling down.

• Pull the upper rack forwards.

•  Check that the water jet holes are not blocked.

•   If cleaning is required, remove the arm by 

unscrewing the nut.

•  Clean the spray arm and replace it in the 

reverse order.

•  A filter is incorporated in the connection of 

the valve on the water inlet hose.  

If insufficient water flows into the dishwasher, 

check that the filter is not blocked.

•   Cleaning the filter 

-  Disconnect the dishwasher 

from the mains supply. 

Switch off at the mains 

socket and remove the plug. 

  - Turn off the tap. 

  - Unscrew the inlet hose.  

  -  Remove the filter from 

connection.

  -  Clean the filter in the supply 

hose under running water.

  -  Refit the filter, making sure 

it is sitting correctly.

  - Reconnect the inlet hose to the tap. 

  - Turn on the tap.

•  If there is a leak, the inlet hose might not be 

on securely, or it may have been screwed on 

at an angle. Unscrew and reconnect the water 

inlet valve correctly.

•  Reconnect power supply.

After each cycle, clean the filter for a better 

• 

washing result.

Before starting, check that the filter is 

• 

assembled well. If the filter is not assembled 

correctly, you might have a poor cleaning 

result.