Barco Projector 26-0313000-00 Benutzerhandbuch
104
Encore Presentation System • User’s Guide • Rev 04
3. Hardware Installation
Program and Source Link Connections
`ÉåíÉê=gìëíáÑáÉÇ=`çåÑáÖìê~íáçå
Center justification means that the projected image is properly centered within the available
number of pixels, and that unused source material is removed from the far left and far right
of the image. A two-projector sample is illustrated below.
number of pixels, and that unused source material is removed from the far left and far right
of the image. A two-projector sample is illustrated below.
Figure 3-16. Center Justification
Use the following steps to connect Program and Source Links for left justification:
1. Program Link Connections (DVI-I), Two Projectors
Use the following diagram for reference:
Figure 3-17. Program Link Connections, Two Projectors
Connect:
~
Processor 1 Program Link Out > Processor 2 Program Link In
~
Processor 2 Program Link Out > Processor 1 Program Link In
2. Program
Link
Connections (DVI-I), Three Projectors
Use the following diagram for reference:
Figure 3-18. Program Link Connections, Three Projectors
båÅçêÉ
Projector 1
Image
Unused
Source
Material
Image
Overlap
Region
Projector 2
Image
Unused
Source
Material
Important
Center justified systems are only supported in two, three, and
four-projector configurations.
four-projector configurations.
Processor 1
(VP only)
Program
Link Out
Program
Link In
Processor 2
(VP or VPx)
Program
Link Out
Program
Link In
Processor 1
(VP only)
Program
Link Out
Program
Link In
Processor 2
(VP or VPx)
Program
Link Out
Program
Link In
Processor 3
(VP or VPx)
Program
Link Out
Program
Link In