Barco Projector 26-0313000-00 Benutzerhandbuch

Controller Sections

The figures below illustrate the 

Preset Sections on each Controller model.

Figure 4-9.  Preset Section, Controller SC

Figure 4-10.  Preset Section, Controller LC

A

 Preset is a register in which you can store and recall entire Controller setups.  In basic 

terms, one preset represents a single “look” of the Controller — including the current state 
of all mixers, layers, sources and the DSK.  Please note:

The

 Controller SC includes buttons for 64 Presets (8 pages of 8 presets each).

The

 Controller LC has buttons for 900 Presets (30 pages of 30 presets each). 

Following are descriptions of each button’s function in the 

Preset Section.  

Preset Buttons — press to recall a Preset to Preview.  If “resources” are available, the 
“look” stored with that preset will be recalled.  If the button does not light, system resources 
are not currently available to process the request.  

When lit, the

 Red LED above a button indicates the currently selected page.  

S

If 

LED 3 and button 30 are lit, the 30th Preset on page 3 is active.    

In Chapter 5, refer to the “

” section on page 208 for 

information about the 

Preset Recall Options Menu.  In Chapter 7, refer to the “

” section on page 345 for additional information about resources.   

Learn — hold down Learn, then press the desired Preset button to store the overall look of 
the Controller into that register. 

S

To store the Controller setup in preset register 2, press 

Learn + 2.

All Preset recall functions are affected by the settings on the 
Preset Recall Options Menu.  This menu (accessed by 
pressing 

Presets on the System Keypad) enables you to 

select all or a portion of the stored Preset for recall.