Barco Projector 26-0313000-00 Benutzerhandbuch

Controller Sections

The figures below illustrate the 

Layer Control Section on each Controller.  

Figure 4-15.  Layer Control Section, Controller SC

Figure 4-16.  Layer Control Section, Controller LC

The buttons in the 

Layer Control Section enable you to select (on Preview) the sources 

that will transition to or from

 Program — including backgrounds, layers and the DSK.  When 

you select a blue “layer” button, you are electronically selecting a scaler that you want to 
assign as a PIP or Key, or modify in some manner.  In this way, you control the overall look 
on Preview before you transition that look to Program.  

Please note the following points:

The 

Controller LC can control up to 12 layers on six mixers in a “stack” 

configuration.

Using the 

Shift Layers button in the Layer Functions Section, the Controller 

SC can also control up to 12 layers on six mixers in a “stack” configuration.  Refer 
to the “

” heading on page 131 for details     

Two background sources and one DSK are provided.

Each identical mixer is comprised of two layers (

A and B) and a Split button.

The buttons are arranged left-to-right in order of visual priority — 

backgrounds 

(lowest priority), 

mixers (in order of priority), and the DSK (highest priority).

Any combination of backgrounds, layers and DSK can be selected on Preview for 
transition to or from Program, provided that resources are available.  In Chapter 7, 
refer to the “

” section on page 345 for more details.