Barco Projector 26-0313000-00 Benutzerhandbuch
Encore Presentation System • User’s Guide • Rev 04
149
5. Menu Orientation
Input Menu
fåéìí=jÉåì=aÉëÅêáéíáçå
The figure below illustrates the Input Menu:
Figure 5-3. Input Menu (sample)
The Input Menu is used to adjust all parameters relating to both dedicated and routed
inputs, including the physical sources connected to the Processor. The menu enables you
to set all configuration options for the selected input.
inputs, including the physical sources connected to the Processor. The menu enables you
to set all configuration options for the selected input.
To access the menu:
•
Press a layer button in the Layer Control Section (the button blinks).
•
Select an input on the Source Selection Bus (the button blinks).
•
Press {INPUT} on the Home Menu, or press Input in the Keypad Section.
The currently selected input appears in the menu’s upper right corner. The menu tracks the
selected input, thus, if you switch inputs on the Source Selection Bus, the menu is
immediately re-assigned to the new input.
selected input, thus, if you switch inputs on the Source Selection Bus, the menu is
immediately re-assigned to the new input.
Input Connector
Format NTSC <480i>
Input Type
Gamma
Color Space
Sampling Mode
1.0
HD-15
YPbPr
[ SMPTE ]
[ 1:1 ]
H
O
O
M
E
N
A
V
A
V
A
D
D
J
INPUT MENU
SRC_1
C
F
G
S
A
V
E
A
V
E
APPLY
FORMAT
SIZING
COLOR
BALANCE
FORCE
ACQUIRE
Destination
1
Contrast < % >
100.0
Brightness < % >
100.0
A
R
R
Note
A layer must be selected in order to access the menu.